Installer heating a graphic onto a car panel

Available across India

Installation Support

Get your IDE Graphics professionally installed by our trained technicians across 38+ cities. We ensure a flawless finish every time.

  • 38+Cities

    Pan-India installation network spanning major metros and Tier 1 cities.

  • 100%Certified

    Technicians trained and certified specifically for vinyl graphic installation.

  • ZeroCompromise

    Flawless finish guaranteed. We do not stop until it is perfect.

  • 24/7Support

    Post-install assistance available whenever you need it.

Professional install

How long does it take?

Fitting time depends on how much of the car is covered.

Minimal coverageCar with IDE Graphics Series decals
IDE Graphics Series15 to 20 min
Minimal coverageTailored decals
Part of the carCar with IDE Partial X graphics
IDE Partial X Series45 min to 1 hr
Part of the carFrom Rs. 7,500
50% to full coverageCar with an IDE One Off Edition wrap
IDE One Off Edition2 days
50% to full coverageFrom Rs. 23,999

Installation charges are paid directly to the installer partner.

Book a certified installer

Four simple steps

Prefer a professional fitting? Our trained installer partners cover 38+ cities across India.

  1. Order your kit

    Choose your wrap, hood graphic, roof graphic, or full-body kit from our collection and place your order online.

  2. Request installation support

    Tell us your city via WhatsApp and we'll do our best to connect you with a trained installation partner near you.

  3. Trained installation

    Our installer partners are specifically trained in fitting IDE Graphics vinyls, from Series kits to One Off Editions.

  4. Enjoy the new look

    Your vehicle is ready to turn heads. Follow our care guide to keep it looking perfect for years.

Where we operate

38+ cities and growing

Our certified installer network spans metros, Tier 1, and select Tier 2 cities across India.

North India

DelhiNoidaFaridabadChandigarhLudhianaJalandharBathindaJammuSrinagarDehradunRoorkeeJaipurUdaipurKotaBikaner

West India

MumbaiPuneNagpurAhmedabadGandhinagarVadodaraSuratRajkotGoa

South India

HyderabadChennaiCoimbatoreMangaloreThrissur

East & Central

KolkataGuwahatiPatnaLucknowKanpurVaranasiBhopalIndoreGwalior

Find an installer near you

Tell us about your car and we will connect you with a trained installer on WhatsApp. Don't see your city? Write it in anyway, we are expanding every quarter.

What comes in an IDE Graphics kit: warranty card, squeegee, orientation guide and instruction sheet

Inside every kit

Everything you need, in the box

  • Graphic decalsCut and ready for your car.
  • 1 squeegeeFor a smooth, bubble-free finish.
  • Instruction sheetThe 8-step guide, printed on the card.
  • Warranty registrationScan the card to register and get support.

Want to do it yourself?

Guides and care

How to apply your IDE Graphics decals (8 steps)
  1. 01

    Inspect

    Inspect the decal for any damage. Make sure you got the right decal kit for your vehicle.

  2. 02

    Clean

    Clean the surface with 70% IPA (isopropyl alcohol) and allow to dry completely.

  3. 03

    Orientation

    Verify the design and orientation by comparing it with the vehicle before peeling.

  4. 04

    Application

    Slowly peel the liner and attach the decal from one side while aligning carefully.

  5. 05

    Placement

    Position the decal on the vehicle as per the marks and tape guide provided.

  6. 06

    Preparation

    Post heat using a heat gun to mold the decal properly on curves and edges.

  7. 07

    Squeegee

    Squeegee from left to right and from center outward to ensure proper adhesion throughout.

  8. 08

    Final adhesion

    Use a heat gun for 1 to 2 minutes and allow 7 to 8 hours for final adhesion. You're done.

Watch DIY install videos on YouTube

Care instructions: pro tips for lasting results
Do not apply in dusty, very hot, direct sunlight, or window area conditions.
Avoid touching the adhesive surface with hands during application.
Wait 3 to 5 days before washing the vehicle after installation.
Clean hands with soap and water before decal application for best adhesion.
Use a soft microfiber cloth for cleaning the decal surface.
For best results, don't park in high heat for a week and avoid car wash.

Run a detailing studio or wrap shop?

Join our dealer network and carry IDE Graphics in your city.

Become a dealer partner →
Shopping cart

Your cart is empty.

Return to shop